# Beginner question DIN USB more than 2 devices

**URL:** <https://forum.electra.one/t/beginner-question-din-usb-more-than-2-devices/3344>\
**Category:** General discussion\
**Created:** [November 3, 2024, 10:34pm UTC](https://forum.electra.one/t/beginner-question-din-usb-more-than-2-devices/3344 "2024-11-03T22:34:24Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![AlainT](https://avatars.discourse-cdn.com/v4/letter/a/0ea827/32.png) [@AlainT](https://forum.electra.one/u/AlainT)\
**Post date:** [November 3, 2024, 10:34pm UTC](https://forum.electra.one/t/beginner-question-din-usb-more-than-2-devices/3344/1 "2024-11-03T22:34:24Z")

</div>

i just received elecra one mk2

i connect a mix console to usb host, it is recognized and i can control it.  
i can also send midi control messages to a synth at midi Din Out2, it works  
when i send command for example to usb device i see the usb flashing at top of sreen and also the midi1 out

the manual say;  
One preset may have up to 32 devices configured. All of them can be used at the same time.

i don’t understand how connect ands control more than two devices.

---

<div class="post-metadata">

**Author:** ![Phommed](https://avatars.discourse-cdn.com/v4/letter/p/ce73a5/32.png) [@Phommed](https://forum.electra.one/u/Phommed)\
**Post date:** [November 3, 2024, 11:08pm UTC](https://forum.electra.one/t/beginner-question-din-usb-more-than-2-devices/3344/2 "2024-11-03T23:08:50Z")

</div>

Hi, you use separate midi channels, and chain your external midi devices together if necessary.

See [Multiple Instruments at once? - #3 by Uija](https://forum.electra.one/t/multiple-instruments-at-once/752/3)

---

<div class="post-metadata">

**Author:** ![AlainT](https://avatars.discourse-cdn.com/v4/letter/a/0ea827/32.png) [@AlainT](https://forum.electra.one/u/AlainT)\
**Post date:** [November 4, 2024, 5:06pm UTC](https://forum.electra.one/t/beginner-question-din-usb-more-than-2-devices/3344/3 "2024-11-04T17:06:08Z")

</div>

ah yes of course, so it is not real multi midi device. I will go with my mio XL.  
for just control devices it would be nice for some users to use usb device out and also use midi din out 1 and 2 without routing/merging usb/din

---

<div class="post-metadata">

**Author:** ![markus.schloesser](https://avatars.discourse-cdn.com/v4/letter/m/8e7dd6/32.png) [@markus.schloesser](https://forum.electra.one/u/markus.schloesser)\
**Post date:** [November 4, 2024, 11:19pm UTC](https://forum.electra.one/t/beginner-question-din-usb-more-than-2-devices/3344/4 "2024-11-04T23:19:29Z")

</div>

You can use the 2 midi din ports as well as the USB port (even with a hub, iirc there was recently a question about that) simultaneously, but I use my Mio as well 😊
