# Broader range of "jump-point"

**URL:** <https://forum.electra.one/t/broader-range-of-jump-point/75>\
**Category:** Bug reports\
**Created:** [March 11, 2020, 4:31pm UTC](https://forum.electra.one/t/broader-range-of-jump-point/75 "2020-03-11T16:31:08Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![aurex](https://avatars.discourse-cdn.com/v4/letter/a/76d3ee/32.png) [@aurex](https://forum.electra.one/u/aurex)\
**Post date:** [March 11, 2020, 4:31pm UTC](https://forum.electra.one/t/broader-range-of-jump-point/75/1 "2020-03-11T16:31:08Z")

</div>

Hello. When programming CC’s for a plugin (using lists), I noticed the plugin needs value 80 to switch a button, but sends back value 79 to the controller. The problem is that when I program Electra One to send value 80, the virtual knob turns but it doesn’t work the other way: when I turn the virtual knob with my mouse, the Electra One display shows a red square around the parameter because value 79 isn’t recognised (and jumps back to the default minimum value).

I know the problem is the plugin, but I think there will be more plugins that could send back a wrong value (0-127 vs 1-128). Anybody knows a workaround?

A possible solution would be to have a separate value for input and output but I agree that complicates things a tiny bit. However, not being able to map plugins perfectly would be much worse I think.

---

<div class="post-metadata">

**Author:** ![martin](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/martin/32/145_2.png) [@martin](https://forum.electra.one/u/martin)\
**Post date:** [March 13, 2020, 2:25pm UTC](https://forum.electra.one/t/broader-range-of-jump-point/75/2 "2020-03-13T14:25:29Z")

</div>

Hi there, fully understood, I will think about how this could be resolved. Just for my reference, what plugin is doing that?

Thanks!

---

<div class="post-metadata">

**Author:** ![aurex](https://avatars.discourse-cdn.com/v4/letter/a/76d3ee/32.png) [@aurex](https://forum.electra.one/u/aurex)\
**Post date:** [March 13, 2020, 3:52pm UTC](https://forum.electra.one/t/broader-range-of-jump-point/75/3 "2020-03-13T15:52:15Z")

</div>

Hi Martin. I have this problem with Elysia Phil’s Cascade but suspect other plugin’s can have this problem too.

All the knobs that have ‘jumping values’ (grid / resonance / filter) can’t be mapped correctly (they’re sending and expecting a different cc value with a difference of one. For example Grid S2 needs to receive value 80 to move the knob but sends back value 79, resulting in a red box on the One display).

Thanks. Regards, Stef