# Default State "On" for "Pad Toggle"?

**URL:** <https://forum.electra.one/t/default-state-on-for-pad-toggle/2813>\
**Category:** General discussion\
**Created:** [April 6, 2024, 9:02am UTC](https://forum.electra.one/t/default-state-on-for-pad-toggle/2813 "2024-04-06T09:02:09Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![HaPe](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/hape/32/1028_2.png) [@HaPe](https://forum.electra.one/u/HaPe)\
**Post date:** [April 6, 2024, 9:02am UTC](https://forum.electra.one/t/default-state-on-for-pad-toggle/2813/1 "2024-04-06T09:02:10Z")

</div>

I just tried to have a Toggle Pad in the default state “On” but it doesn’t seem to work as expected. To be sure it is not related to my SysEx command I tried with a pure CC Pad but after the synchronisation it shows set to “Off” on my E1 like normal. I even temporarily deleted all Lua functions but nothing helped.

 ![image](https://europe1.discourse-cdn.com/flex017/uploads/electraone/original/2X/a/afd0ecc57e9f8e38ff6423db9935caa0c0467b0f.png)

Any ideas? Thanks in advance.

---

<div class="post-metadata">

**Author:** ![martin](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/martin/32/145_2.png) [@martin](https://forum.electra.one/u/martin)\
**Post date:** [April 6, 2024, 11:55am UTC](https://forum.electra.one/t/default-state-on-for-pad-toggle/2813/2 "2024-04-06T11:55:54Z")

</div>

hmm, strange I tested it on mk2 first. It works just fine. On mk1, however, the default state is ignored. I will look at it. I am planning to release an updated mk1 firmware this weekend, I will try to fix it before the firmware goes out.

---

<div class="post-metadata">

**Author:** ![HaPe](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/hape/32/1028_2.png) [@HaPe](https://forum.electra.one/u/HaPe)\
**Post date:** [April 6, 2024, 12:14pm UTC](https://forum.electra.one/t/default-state-on-for-pad-toggle/2813/3 "2024-04-06T12:14:58Z")

</div>

Thanks so much Martin. Another “off topic” thing that I just recognized recently is the following:

I use your “[Lua] Page switching” for all my presets and can’t remember any issues as I used to work with the E1 before a pretty long break caused by a lot of work with more priority.

Currently the E1 always calls up page 11 if I use your “[Lua] Page switching” example. In my current layout it calls up page 2 which makes it impossible at least for me to reproduce a reason. I tried to set a default page using some “Try&Error Lua dummy code” that I thought might work but it took me already too long without any result.

After each synchronization I need to call up my page 1 which I am currently working on which is a bit annoying. It would be also cool to set a dedicated page to call up after edits because when working on another page it is just convenient to always land on that page to check things and continue working.

I hope it makes sense and I didn’t overlook something.

---

<div class="post-metadata">

**Author:** ![martin](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/martin/32/145_2.png) [@martin](https://forum.electra.one/u/martin)\
**Post date:** [April 6, 2024, 2:00pm UTC](https://forum.electra.one/t/default-state-on-for-pad-toggle/2813/4 "2024-04-06T14:00:04Z")

</div>

@HaPe I just tried the [[Lua] Page switching](https://app.electra.one/preset/SsyU03QbnNjwxXDSyYF0). It seems to work as expected. Can you send me a link to one your presets? I will check that for you. If you agree, send it as a PM or on a forum chat. Note, you do not need to make the preset public if you share the link.

---

<div class="post-metadata">

**Author:** ![Foksadure](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/foksadure/32/462_2.png) [@Foksadure](https://forum.electra.one/u/Foksadure)\
**Post date:** [April 6, 2024, 8:02pm UTC](https://forum.electra.one/t/default-state-on-for-pad-toggle/2813/5 "2024-04-06T20:02:43Z")

</div>

Hey,  
Sorry to hijack HaPe’s thread, but since you’re planning to release a firmware for mk1, I just noticed a bug today using [my Minitaur preset](https://app.electra.one/preset/xIFcAOC9JCqWjVrti3h1):  
On the Envelopes controls, long press on a knob does not bring up the detail window anymore.  
[https://docs.electra.one/concept.html#envelopes](https://docs.electra.one/concept.html#envelopes)  
One’s has to use the `[SECTION 1]` button while holding the knob.
