# Default values not being sent from Editor **URL:** \ **Category:** General discussion\ **Created:** [January 27, 2023, 6:47pm UTC](https://forum.electra.one/t/default-values-not-being-sent-from-editor/1875 "2023-01-27T18:47:18Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![HaPe](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/hape/32/1028_2.png) [@HaPe](https://forum.electra.one/u/HaPe)\ **Post date:** [January 27, 2023, 6:47pm UTC](https://forum.electra.one/t/default-values-not-being-sent-from-editor/1875/1 "2023-01-27T18:47:18Z")
I started a new Preset and needed to test different things with SysEx commands. Currently I just have three controls. Only one of them is set to its default value after sending the Preset from the Editor to the E1. Both other controls are set to different - at least for me - not reproducible values. As follows a combined screenshot showing the settings as well as the results on the E1 (big red text values). ![image](https://europe1.discourse-cdn.com/flex017/uploads/electraone/original/2X/5/5614651d1324c24c1994969f2ee99d8fe9d4770f.jpeg) When I double tap on the controls (on the unit itself) the values jump to their default positions like normal. As I created all my previous Presets I never recognized any similar issue. In addition I checked using the big slider with a long tap on a control. It works but it doesn’t show (or update) the value while moving it. It updates no before the release. Is that normal or an issue? I can’t remember if I tried this before. Thanks in advance. ---
**Author:** ![Flyweight](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/flyweight/32/342_2.png) [@Flyweight](https://forum.electra.one/u/Flyweight)\ **Post date:** [January 27, 2023, 7:22pm UTC](https://forum.electra.one/t/default-values-not-being-sent-from-editor/1875/2 "2023-01-27T19:22:17Z")
> [@HaPe](#): > > controls are set to different - at least for me - not repr Yeah I tried and its hit and miss. Sometimes it works sometimes not. Looks you found a bug. In my example below OSC A Volume has a default set to 61 but on the e.one its stays on zero. Filter freq is set to 99 and the e.one its set nicely to 99 as well. ![image](https://europe1.discourse-cdn.com/flex017/uploads/electraone/original/2X/0/0c7ee692d031ea5e862f277b610baa033c8aa9d9.png) [https://app.electra.one/preset/AEiyvOSOCOuONNkZG0Xp](https://app.electra.one/preset/AEiyvOSOCOuONNkZG0Xp) ---
**Author:** ![HaPe](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/hape/32/1028_2.png) [@HaPe](https://forum.electra.one/u/HaPe)\ **Post date:** [January 27, 2023, 7:27pm UTC](https://forum.electra.one/t/default-values-not-being-sent-from-editor/1875/3 "2023-01-27T19:27:21Z")
Thanks @Flyweight for the confirmation. 😀 ---
**Author:** ![HaPe](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/hape/32/1028_2.png) [@HaPe](https://forum.electra.one/u/HaPe)\ **Post date:** [January 29, 2023, 1:20pm UTC](https://forum.electra.one/t/default-values-not-being-sent-from-editor/1875/4 "2023-01-29T13:20:34Z")
To my surprise today all controls are being set to their default values after sending them from the editor as usual before. Was some improvement going on in the web editor or could this be a Chrome/Hardware or USB connection issue? Anyway, I will keep an eye on it but today it works great. ---
**Author:** ![HaPe](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/hape/32/1028_2.png) [@HaPe](https://forum.electra.one/u/HaPe)\ **Post date:** [January 29, 2023, 3:31pm UTC](https://forum.electra.one/t/default-values-not-being-sent-from-editor/1875/5 "2023-01-29T15:31:33Z")
Now I figured out the reason for this issue. Indeed it is related to this information… > [@Parameter Number (ID) changes SysEx values](https://forum.electra.one/t/parameter-number-id-changes-sysex-values/1876/11): > > @hape I am looking at the issue and I just noticed that the preset has controls with the same ids on different pages. In that specific example you sent, the sysex control with parameter number 3 is located on the second page. The trouble is that in such situation - when parameter number is the same but other message bytes differ - E1 sends out the first message linked to that parameter. I will still research it more, I just wanted to share what I found so far. I will also think about how to di… If controls on different pages sharing the same parameter ID’s the setting of default values during the synchronisation does also not work. If controls on all pages have unique parameter ID’s everything works fine. Just FYI. Enjoy the rest of your Sunday (with or without E1). 😀