# Electra Router not working (at all)
**URL:** https://forum.electra.one/t/electra-router-not-working-at-all/3534
**Category:** General discussion
**Created:** [February 4, 2025, 10:09am UTC](https://forum.electra.one/t/electra-router-not-working-at-all/3534 "2025-02-04T10:09:29Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@topa](https://forum.electra.one/u/topa)
#### Post date: [February 4, 2025, 10:09am UTC](https://forum.electra.one/t/electra-router-not-working-at-all/3534/1 "2025-02-04T10:09:29Z")
Hi!
I am not able to make changes on the electra router.
I can modifiy the settings via the electra app, but when sending to the electra, I can see usb activity but the changes dont become active.
I have used all the electra ports in the app, but the problem persists.
I can only route from usb / host to midi 1.
Midi in 2 does not route anywhere.
My electra is v1 and im running the latest update available.
Any ideas?
Thanks!
---
### Author:  [@martin](https://forum.electra.one/u/martin)
#### Post date: [February 7, 2025, 9:25am UTC](https://forum.electra.one/t/electra-router-not-working-at-all/3534/2 "2025-02-07T09:25:06Z")
Try uploading the following file to your Electra (using either MIDIOX or a Sysex Librarian). It is a default config file:
[upload-config.syx](https://forum.electra.one/uploads/short-url/fkfP1fexKI8PIw07p9T2EiLJsN4.syx) (566 Bytes)
Once you upload it, your E1 should route messages from USB device / host 2 inputs to MIDI IO 2 output port. If not, please ping me on the PM. Thanks!