# Firmware 1.1.6

**URL:** <https://forum.electra.one/t/firmware-1-1-6/229>\
**Category:** Releases\
**Created:** [November 4, 2020, 7:00pm UTC](https://forum.electra.one/t/firmware-1-1-6/229 "2020-11-04T19:00:49Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![martin](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/martin/32/145_2.png) [@martin](https://forum.electra.one/u/martin)\
**Post date:** [November 4, 2020, 7:00pm UTC](https://forum.electra.one/t/firmware-1-1-6/229/1 "2020-11-04T19:00:49Z")

</div>

A bugfix release based on the feedback from all of you. I recommend updating.

The major thing was disabled MIDI IO IN. I disabled the module when debugging another part of the firmware - and did not run full test. My apologize to everybody.

The firmware is available on the [Downloads page](https://docs.electra.one/downloads/firmware.html).

**Changelog:**

- Sysex parameters numbers can now go from up to full 14-bit number
- MIDI learn handles SysEx messages correctly
- Full screen fader is more narrow now to allow reaching min and max values easier
- And well, MIDI IO IN enabled again

Thanks to @dr_funk, @buyallthecontrollers for verifying that the defects were fixed. @razmusen for the input on the fader.

---

<div class="post-metadata">

**Author:** ![psyndrome](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/psyndrome/32/2328_2.png) [@psyndrome](https://forum.electra.one/u/psyndrome)\
**Post date:** [November 4, 2020, 8:55pm UTC](https://forum.electra.one/t/firmware-1-1-6/229/2 "2020-11-04T20:55:59Z")

</div>

Hey @martin !  
An firmware update RSS or mail newsletter would be cool!

Best,  
Matthias

---

<div class="post-metadata">

**Author:** ![markus.schloesser](https://avatars.discourse-cdn.com/v4/letter/m/8e7dd6/32.png) [@markus.schloesser](https://forum.electra.one/u/markus.schloesser)\
**Post date:** [November 5, 2020, 3:59am UTC](https://forum.electra.one/t/firmware-1-1-6/229/3 "2020-11-05T03:59:09Z")

</div>

You can subscribe (“watch”) to the release category here and will get an email if there’s a new release (that’s what I do)

---

<div class="post-metadata">

**Author:** ![martin](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/martin/32/145_2.png) [@martin](https://forum.electra.one/u/martin)\
**Post date:** [November 5, 2020, 6:21am UTC](https://forum.electra.one/t/firmware-1-1-6/229/4 "2020-11-05T06:21:53Z")

</div>

> [@psyndrome](#):
>
> An firmware update RSS or mail newsletter would be cool!

We will add info about the availability of the new firmware in the app. it means you will also know if you are up to date.

And as @markus.schloesser mentioned, the category can be watched. You should get notified then.

---

<div class="post-metadata">

**Author:** ![markus.schloesser](https://avatars.discourse-cdn.com/v4/letter/m/8e7dd6/32.png) [@markus.schloesser](https://forum.electra.one/u/markus.schloesser)\
**Post date:** [November 5, 2020, 5:56pm UTC](https://forum.electra.one/t/firmware-1-1-6/229/5 "2020-11-05T17:56:21Z")

</div>

Btw I love the new preset page design, much better than before!