# How To Change Page with PGM? **URL:** \ **Category:** General discussion\ **Created:** [September 26, 2022, 3:31pm UTC](https://forum.electra.one/t/how-to-change-page-with-pgm/1702 "2022-09-26T15:31:37Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Aladin](https://avatars.discourse-cdn.com/v4/letter/a/ce73a5/32.png) [@Aladin](https://forum.electra.one/u/Aladin)\ **Post date:** [September 26, 2022, 3:31pm UTC](https://forum.electra.one/t/how-to-change-page-with-pgm/1702/1 "2022-09-26T15:31:37Z")
Hello! I’m trying to change pages in Electra One from Ableton PGM change. I configured it on the web app (see picture). But it doesn’t seem to work… only seem to change Presets and not Page. ![Capture d’écran 2022-09-26 à 17.24.47](https://europe1.discourse-cdn.com/flex017/uploads/electraone/original/2X/a/aa10a4c088d0379456ccbb2a7b1cb515223e84ea.png) Any idea? ❤ thank a lot! ---
**Author:** ![NewIgnis](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/newignis/32/767_2.png) [@NewIgnis](https://forum.electra.one/u/NewIgnis)\ **Post date:** [September 26, 2022, 4:54pm UTC](https://forum.electra.one/t/how-to-change-page-with-pgm/1702/2 "2022-09-26T16:54:45Z")
I’ve never used that myself. So I can’t think only of some basis reasons: - do check the midi message arrives at the E1 - Check the sender sends on the same mid channel as the E1 is listening to for this purpose. ---
**Author:** ![Aladin](https://avatars.discourse-cdn.com/v4/letter/a/ce73a5/32.png) [@Aladin](https://forum.electra.one/u/Aladin)\ **Post date:** [September 26, 2022, 5:33pm UTC](https://forum.electra.one/t/how-to-change-page-with-pgm/1702/3 "2022-09-26T17:33:40Z")
Hello, Thank you for your answer. 😀 I’m sure the midi message arrives because when I send the PGM Change from ableton to ELECTRA CTRL it change the Preset and not the page. " \* Check the sender sends on the same mid channel as the E1 is listening to for this purpose." how do I choose the E1 listenning channel for this purpose? I Didn’t found info on the online manual. thank you a lot!! ---
**Author:** ![Aladin](https://avatars.discourse-cdn.com/v4/letter/a/ce73a5/32.png) [@Aladin](https://forum.electra.one/u/Aladin)\ **Post date:** [October 6, 2022, 10:01am UTC](https://forum.electra.one/t/how-to-change-page-with-pgm/1702/4 "2022-10-06T10:01:27Z")
Does someone found something regarding this function? ---
**Author:** ![NewIgnis](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/newignis/32/767_2.png) [@NewIgnis](https://forum.electra.one/u/NewIgnis)\ **Post date:** [October 6, 2022, 5:53pm UTC](https://forum.electra.one/t/how-to-change-page-with-pgm/1702/5 "2022-10-06T17:53:47Z")
sorry, I do not have that knowledge ---
**Author:** ![Bugnology](https://avatars.discourse-cdn.com/v4/letter/b/74df32/32.png) [@Bugnology](https://forum.electra.one/u/Bugnology)\ **Post date:** [November 3, 2022, 7:30pm UTC](https://forum.electra.one/t/how-to-change-page-with-pgm/1702/6 "2022-11-03T19:30:40Z")
Hi Everyone, I’ve the same problem…I send program change to E1 CTRL port and it changes the preset, not the page. Is possible change the pages inside the preset? If possible, what program change number will be used? ---
**Author:** ![Bugnology](https://avatars.discourse-cdn.com/v4/letter/b/74df32/32.png) [@Bugnology](https://forum.electra.one/u/Bugnology)\ **Post date:** [November 4, 2022, 11:11am UTC](https://forum.electra.one/t/how-to-change-page-with-pgm/1702/7 "2022-11-04T11:11:42Z")
This for me works > [@How to load Electra One banks and pages via my Morningstar MC8?](https://forum.electra.one/t/how-to-load-electra-one-banks-and-pages-via-my-morningstar-mc8/345/3): > > Hi Matthias! I am not sure if it will fit your setup but let’s try. If needed, things can be adjusted. This feature was pretty much inspired by your setup anyways slight_smile To configure Electra’s MIDI control commands: go to [https://app.electra.one/sandbox](https://app.electra.one/sandbox) select “config” option paste the config file (as shown below) to the text window check that there is “VALID” text above the Upload button 5… press Upload Connect your MC8 to Electra’s Control port: Connect your MC8 with a USB cab…