# Mini - Knob press **URL:** \ **Category:** Developers\ **Created:** [February 4, 2026, 4:06pm UTC](https://forum.electra.one/t/mini-knob-press/4185 "2026-02-04T16:06:14Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![HaPe](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/hape/32/1028_2.png) [@HaPe](https://forum.electra.one/u/HaPe)\ **Post date:** [February 5, 2026, 5:11pm UTC](https://forum.electra.one/t/mini-knob-press/4185/2 "2026-02-05T17:11:45Z")
I would love to see a way to use the encoder switches in addition to the dial controller type even without the need of Lua scripts as I already mentioned here. > [@Electra One Mini | Some wishes for a future update](https://forum.electra.one/t/electra-one-mini-some-wishes-for-a-future-update/4176): > > I’m aware that the hardworking E1 team is currently very busy. Days could probably have 72 hours or more – at least temporarily. I’m truly impressed with the E1 Mini. Nevertheless, I’d like to share some suggestions for improvements I’d like to see. Below, I’ll share my initial ideas for future E1 Mini updates. A) The values ​​for the new “Rotary Knob” control type could be displayed in the center of the control. I would like flexible assignment of the label fields. One option would be the cu… Regarding the Mini’s practical but smaller form factor, I think it’s wasted potential to use only one of the two functions. I tried your script, but it produced errors. I then simplified it and managed to get both CC types to be sent when the encoder is turned. However, nothing happened when the switch was pressed. Have you found a way to detect when the switch is pressed and assign a corresponding function? If so, could you send me a link to a working preset? I’m not very familiar with Lua, but Gemini has helped me a lot with some tasks. Unfortunately, not for this purpose yet. 🤷🏼‍♂️ --- _[View the full topic](https://forum.electra.one/t/mini-knob-press/4185)._