# Mising parameter ID limit in the editor \[SOLVED\]

**URL:** <https://forum.electra.one/t/mising-parameter-id-limit-in-the-editor-solved/217>\
**Category:** Bug reports\
**Created:** [November 1, 2020, 10:01am UTC](https://forum.electra.one/t/mising-parameter-id-limit-in-the-editor-solved/217 "2020-11-01T10:01:16Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![buyallthecontrollers](https://avatars.discourse-cdn.com/v4/letter/b/d07c76/32.png) [@buyallthecontrollers](https://forum.electra.one/u/buyallthecontrollers)\
**Post date:** [November 1, 2020, 10:01am UTC](https://forum.electra.one/t/mising-parameter-id-limit-in-the-editor-solved/217/1 "2020-11-01T10:01:16Z")

</div>

I wanted my parameter IDs for sysex controls to be easily identifiable, so I started to number them at 1000.  
The one at 1000 had a strange behaviour. The one at 1001 simply didn’t work. Hours later I decided to try with different IDs and lo and behold, 50 & 51 worked like a charm.  
Maybe I didn’t properly RTFM, but it would be good to have some form of input validation or some tooltips?

---

<div class="post-metadata">

**Author:** ![martin](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/martin/32/145_2.png) [@martin](https://forum.electra.one/u/martin)\
**Post date:** [November 2, 2020, 8:05am UTC](https://forum.electra.one/t/mising-parameter-id-limit-in-the-editor-solved/217/2 "2020-11-02T08:05:58Z")

</div>

issue fixed and verified to work fine by @buyallthecontrollers. Fix will be included in the upcoming firmware release.