# Touching pots with little spin sets either full or 0 parameter value **URL:** \ **Category:** Bug reports\ **Created:** [April 4, 2024, 9:04am UTC](https://forum.electra.one/t/touching-pots-with-little-spin-sets-either-full-or-0-parameter-value/2803 "2024-04-04T09:04:51Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![Kiamur](https://avatars.discourse-cdn.com/v4/letter/k/c0e974/32.png) [@Kiamur](https://forum.electra.one/u/Kiamur)\ **Post date:** [April 4, 2024, 9:04am UTC](https://forum.electra.one/t/touching-pots-with-little-spin-sets-either-full-or-0-parameter-value/2803/1 "2024-04-04T09:04:51Z")
Hi, I currently play around with Ableton 12, the Ableton remote script and E1 Firmware 3.5.4. While playing with Roar I observed that a little touch with two fingertips and a very slight spin on the knob (really, just a very tiny little spin) sometimes sets the according value to max if I spin it the right or to zero if I spin to the left. I wonder if this is a bug or a feature? Anyway, when I play with Roars Amount parameter, I got really shocked when this occured the first time. Meanwhile, I almost learned to control this effect so I really wonder if this is intentional or not. Anyway, I would rather be able to get rid of that “feature” because when it happens unintentionally, the effect is very ugly. Thanks, Maik ---
**Author:** ![jhh](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/jhh/32/951_2.png) [@jhh](https://forum.electra.one/u/jhh)\ **Post date:** [April 4, 2024, 11:20am UTC](https://forum.electra.one/t/touching-pots-with-little-spin-sets-either-full-or-0-parameter-value/2803/2 "2024-04-04T11:20:21Z")
Does this happen with all Roar parameters? Or only specific one? (If so, which one?) ---
**Author:** ![jhh](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/jhh/32/951_2.png) [@jhh](https://forum.electra.one/u/jhh)\ **Post date:** [April 4, 2024, 12:56pm UTC](https://forum.electra.one/t/touching-pots-with-little-spin-sets-either-full-or-0-parameter-value/2803/3 "2024-04-04T12:56:27Z")
Did a quick test just now and I don’t see this in my setup. Do you have a new (mkII) or older (mkI) E1? Did/do you see it with other presets as well? ---
**Author:** ![Kiamur](https://avatars.discourse-cdn.com/v4/letter/k/c0e974/32.png) [@Kiamur](https://forum.electra.one/u/Kiamur)\ **Post date:** [April 4, 2024, 1:56pm UTC](https://forum.electra.one/t/touching-pots-with-little-spin-sets-either-full-or-0-parameter-value/2803/4 "2024-04-04T13:56:06Z")
I tested it with another knob, too an got the same effect. Didn.t remember the parameter though. I try to prepare a video, showing the issue and I will test additional knobs and parameters as well. To me it “feels” that it is more the hardware that gives the command to max out the parameters, instead of the Ableton script. I have a MK 2. ---
**Author:** ![Kiamur](https://avatars.discourse-cdn.com/v4/letter/k/c0e974/32.png) [@Kiamur](https://forum.electra.one/u/Kiamur)\ **Post date:** [April 4, 2024, 2:19pm UTC](https://forum.electra.one/t/touching-pots-with-little-spin-sets-either-full-or-0-parameter-value/2803/5 "2024-04-04T14:19:43Z")
At least it is reproducible… [![](https://europe1.discourse-cdn.com/flex017/uploads/electraone/original/2X/c/cd419a6eb32a76eb5a8e7c240a722b547bdfc999.jpeg "Elektra One, Ableton Roar troubleshooting.") ](https://www.youtube.com/watch?v=uX6HsOvOXes) In the video it may look as if I am turning the knob heavily, but believe me, it is just a touch with a very gentle turn. Hopefully you see the parameter bar jump in the E1. From the sound you should hear the effect definitely… I could also do this with the Tone Frequency parameter of roar and with several macro knobs of the instrument feeding Roar. It is definitely doing this on many knobs/parameters. Btw.: in the video I tried another parameter, but there it was not happening. ---
**Author:** ![jhh](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/jhh/32/951_2.png) [@jhh](https://forum.electra.one/u/jhh)\ **Post date:** [April 4, 2024, 3:31pm UTC](https://forum.electra.one/t/touching-pots-with-little-spin-sets-either-full-or-0-parameter-value/2803/6 "2024-04-04T15:31:43Z")
I tested myself and did not see this behaviour, so I suspect this is a hardware issue. (Note; I did see strange stuttering for _specific_ paramaters in _specific_ Live devices, but this appeared to be the issue of Live not always sending both bytes of a 14bit MIDI CC message.) BTW: I see that you are using the preset for Roar as generated on the fly by the remote script. The latest version of the remote script does include a predefined preset for Roar as well, with proper layout of controls over pages ---
**Author:** ![Kiamur](https://avatars.discourse-cdn.com/v4/letter/k/c0e974/32.png) [@Kiamur](https://forum.electra.one/u/Kiamur)\ **Post date:** [April 4, 2024, 5:10pm UTC](https://forum.electra.one/t/touching-pots-with-little-spin-sets-either-full-or-0-parameter-value/2803/7 "2024-04-04T17:10:23Z")
Thanks for checking this out. And for the hint for the updated remote script! @Martin: what is your opinion regarding a hardware issue? Maik ---
**Author:** ![jhh](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/jhh/32/951_2.png) [@jhh](https://forum.electra.one/u/jhh)\ **Post date:** [April 4, 2024, 5:49pm UTC](https://forum.electra.one/t/touching-pots-with-little-spin-sets-either-full-or-0-parameter-value/2803/8 "2024-04-04T17:49:10Z")
If you updated the script and the same _pot_ and not the same _control_ is showing weird behaviour, then this is a strong sign of hardware issues. ---
**Author:** ![Kiamur](https://avatars.discourse-cdn.com/v4/letter/k/c0e974/32.png) [@Kiamur](https://forum.electra.one/u/Kiamur)\ **Post date:** [April 4, 2024, 6:36pm UTC](https://forum.electra.one/t/touching-pots-with-little-spin-sets-either-full-or-0-parameter-value/2803/9 "2024-04-04T18:36:21Z")
I updated the script and now, on that knob there is (for Roar) the LFO 2 SMOOTH. I don’t get this parameter to freak out anymore. On page 2, there is the SHAPER 1 AMT parameter on another knob which went haywire but now seems to behave as expected. Additionally, the instrument macros also do not go crazy anymore. It seems as if the update solved the issue… Thank you very much! Maik ---
**Author:** ![jhh](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/jhh/32/951_2.png) [@jhh](https://forum.electra.one/u/jhh)\ **Post date:** [April 4, 2024, 7:25pm UTC](https://forum.electra.one/t/touching-pots-with-little-spin-sets-either-full-or-0-parameter-value/2803/10 "2024-04-04T19:25:03Z")
Hm… I am happy for you, but this is somewhat disconcerting for me as it indicates there was something wrong with the script you were using. Could you please tell me which version of the script you were using before the update? It is written to the log file when the Ableton loads the script. ---
**Author:** ![Kiamur](https://avatars.discourse-cdn.com/v4/letter/k/c0e974/32.png) [@Kiamur](https://forum.electra.one/u/Kiamur)\ **Post date:** [April 4, 2024, 8:04pm UTC](https://forum.electra.one/t/touching-pots-with-little-spin-sets-either-full-or-0-parameter-value/2803/11 "2024-04-04T20:04:29Z")
I am looking for a log file but havn’t found it yet. Can you please tell where it is located? ---
**Author:** ![Kiamur](https://avatars.discourse-cdn.com/v4/letter/k/c0e974/32.png) [@Kiamur](https://forum.electra.one/u/Kiamur)\ **Post date:** [April 4, 2024, 8:16pm UTC](https://forum.electra.one/t/touching-pots-with-little-spin-sets-either-full-or-0-parameter-value/2803/12 "2024-04-04T20:16:22Z")
Ahhh, ChatGPT does know… 😉 # ElectraOne Remote Script version of Tue Mar 5 19:45:28 CET 2024. ---
**Author:** ![jhh](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/jhh/32/951_2.png) [@jhh](https://forum.electra.one/u/jhh)\ **Post date:** [April 4, 2024, 8:38pm UTC](https://forum.electra.one/t/touching-pots-with-little-spin-sets-either-full-or-0-parameter-value/2803/13 "2024-04-04T20:38:57Z")
Thanks. This corroborates my hunch what the bug was; it has indeed since been fixed.