# Using E1 with bome

**URL:** https://forum.electra.one/t/using-e1-with-bome/1765
**Category:** Ideas / Feature requests
**Created:** [November 21, 2022, 10:04pm UTC](https://forum.electra.one/t/using-e1-with-bome/1765 "2022-11-21T22:04:45Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![Abbes](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/abbes/32/989_2.png) [@Abbes](https://forum.electra.one/u/Abbes)
#### Post date: [November 21, 2022, 10:04pm UTC](https://forum.electra.one/t/using-e1-with-bome/1765/1 "2022-11-21T22:04:45Z")

</div>

Hello !  
In a workaround try i figured out how both have my stream deck AND the webapp editor connected to the E1 port 3 .  
Using bome midi translator i created 4 more port (avoiding the loop midi problem)  
Then i have  
Webapp in webapp out,  
strdck in strdck out  
connected to E1 port 3 in and out  
And it works marvelously !  
Still there is a minor problem regarding the web app .  
Everytime i run the webapp , it says the E1 is not connect

 ![E1 not connected](https://europe1.discourse-cdn.com/flex017/uploads/electraone/original/2X/7/7eeceee7d5c591cf1ae07e95439f7d3f38ed20a1.jpeg)

Then i select the virtual port and then i am connected…but i have to do that each time 😅  
Would it be possible that the webapp “remember” the port i used ? regarding cookies or similar ? is it possible ?  
Thanks ! 🙂

---

<div class="post-metadata">

### Author: ![Abbes](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/abbes/32/989_2.png) [@Abbes](https://forum.electra.one/u/Abbes)
#### Post date: [November 21, 2022, 10:39pm UTC](https://forum.electra.one/t/using-e1-with-bome/1765/2 "2022-11-21T22:39:27Z")

</div>

😅 😂  
The webapp connect but It does not transfert the preset from the webapp to the E1 .  
The E1 says “file transfer failed please retry” 🥳  
I suppose that bome can’t handle the flow off data from the webapp.  
don’t know. i will dig into it 🙂 👍

---

<div class="post-metadata">

### Author: ![Toille](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/toille/32/1653_2.png) [@Toille](https://forum.electra.one/u/Toille)
#### Post date: [November 26, 2022, 9:05pm UTC](https://forum.electra.one/t/using-e1-with-bome/1765/3 "2022-11-26T21:05:34Z")

</div>

i have the same issue,  
E1 to iConnectMidi via USB A  
Webapp to iConnectMidi via RTP-MIDI.

E1 is detected but transfer fails.

I don’t exclude that I am doing something wrong in the routing.

---

<div class="post-metadata">

### Author: ![martin](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/martin/32/145_2.png) [@martin](https://forum.electra.one/u/martin)
#### Post date: [December 4, 2022, 12:00pm UTC](https://forum.electra.one/t/using-e1-with-bome/1765/4 "2022-12-04T12:00:11Z")

</div>

> [@Abbes](#):
>
> Then i select the virtual port and then i am connected…but i have to do that each time 😅  
> Would it be possible that the webapp “remember” the port i used ? regarding cookies or similar ? is it possible ?

Just added an option to save port settings on beta.

> [@Abbes](#):
>
> The webapp connect but It does not transfert the preset from the webapp to the E1 .  
> The E1 says “file transfer failed please retry” 🥳  
> I suppose that bome can’t handle the flow off data from the webapp.  
> don’t know. i will dig into it 🙂 👍

I use BomeBox without problems. Maybe it is caused by the Translator Pro?

---

<div class="post-metadata">

### Author: ![martin](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/martin/32/145_2.png) [@martin](https://forum.electra.one/u/martin)
#### Post date: [December 20, 2022, 11:05am UTC](https://forum.electra.one/t/using-e1-with-bome/1765/5 "2022-12-20T11:05:35Z")

</div>

> [@Abbes](#):
>
> Would it be possible that the webapp “remember” the port i used ? regarding cookies or similar ? is it possible ?

As of 3.0, the editor should save settings of the MIDI ports when you change them.