# Virtual Paremeters

**URL:** <https://forum.electra.one/t/virtual-paremeters/460>\
**Category:** General discussion\
**Created:** [February 28, 2021, 4:00pm UTC](https://forum.electra.one/t/virtual-paremeters/460 "2021-02-28T16:00:08Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![RobinC](https://avatars.discourse-cdn.com/v4/letter/r/aeb1de/32.png) [@RobinC](https://forum.electra.one/u/RobinC)\
**Post date:** [February 28, 2021, 4:00pm UTC](https://forum.electra.one/t/virtual-paremeters/460/1 "2021-02-28T16:00:08Z")

</div>

Any documentation on how they work.

I’m still stuck on how I do a program change message just I can send any value I wish between 0 - 127. Used to be able to do this with a work around in an older version of the firmware but can’t seem to get it working in the current firmware

---

<div class="post-metadata">

**Author:** ![martin](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.electra.one/martin/32/145_2.png) [@martin](https://forum.electra.one/u/martin)\
**Post date:** [February 28, 2021, 4:21pm UTC](https://forum.electra.one/t/virtual-paremeters/460/2 "2021-02-28T16:21:50Z")

</div>

Program change support will be included in next release (lists and faders). Expecting to make it public some time next week.